Product ID:QUICK START STARTING FLUID CYLINDER
MSDS Date:06/26/1996
FSC:2910
NIIN:01-224-7963
Status Code:A
MSDS Number: CKCWJ

QUICK START PRODUCTS LTD

HIGHWAY 251 SOUTH
ROCHELLE, IL 61068
US

Emergency Phone: 815-562-5414

Info Phone: 815-562-5414

Cage: 78280

QUICK START PRODUCTS LTD

ROCHELLE, IL 61068 US

Telephone: 815-562-5414

Cage: 78280

CARBON DIOXIDE

CAS: 124-38-9

RTECS: FF6400000

OSHA PEL 5000 PPM

ACGIH TLV: 5000PPM/30000STEL;96

ETHYL ETHER (CERCLA)

CAS: 60-29-7

RTECS: KI5775000

OSHA PEL 400 PPM

ACGIH TLV: 400PPM/500STEL; 9596

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

N-HEPTANE, RELTAED LIGHT HYDROCARBONS

CAS: 142-82-5

RTECS: MI7700000

OSHA PEL 500 PPM

ACGIH TLV: 400 PPM/500STEL;9596

MINERAL OIL, SEVERELY HYDROTREATED PREDOMINANTLY NAPTHENIC

CAS: 64742-53-6

RTECS: PY8036000

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: STRONG ANESTHESIA,
INTOXICATION, UNCONSCIOUSNESS. SKIN: IRRIATION UPON PROLONGED
CONTACT, DEFATTING OF SKIN. EYES: IRRITATION.
Explanation of Carcinogenicity:NONE OF THE COMPONENTS IN THIS MATERIAL
IS LISTED BY IARC, NTP, OSHA, OR ACGIH AS A CARCINOGEN.
Effects of Overexposure:INHALATION: DIZZINESS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHALED: REMOVE TO FRESH AIR. ARTIFICIAL RESPIRATION,
CONSULT PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. REMOVE SOAKED
CLOTHING TO AVOID PROLONGED SKIN CONTACT. EYE:FLUSH WELL WITH
RUNNING WATER FOR 15 MINUTES. INGESTED: CALL PHYSICIAN OR
POISON CONTROL CENTER IMMEDIATELY. PROPER TREATMENTS DEPENDENT ON
CONDITON OF PATIENT AND AMOUNT INGESTED.

Flash Point Method:TCC
Flash Point:=-48.7C, -56.F
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:1.8
Upper Limits:46.0
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, WATER-FOG OR MIST
ONLY, ALCOHOL FOAM.
Fire Fighting Procedures:AVOID POSSIBLE ACCUMULATION OF VAPOR AT FLOOR
LEVEL, AS VAPOR IS HEAVIER THAN AIR. SELF-CONTAINED BREATHING
APPARATUS AND PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING FIRES
INVOLVING CHEMICALS.
Unusual Fire/Explosion Hazard:AVOID POSSIBLE BURSTING OF PRESSURIZED
CAN. DO NOT STORE WHERE TEMPERATURE MAY EXCEED 120F. DO NOT
PUNCTURE OR INCINERATE.

Spill Release Procedures:KEEP AWAY FROM HEAT, FIRE, SPARKS, FLAME.
VENTILATE AREA WELL. CO2 MAY BE USED AS PRECAUTIONARY VAPOR
BLANKET. SMALL AMOUNTS MAY BE FLUSHED AWAY WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE WHERE TEMPERATURES MAY
EXCEED 120F. STORE AWAY FROM FIRE, SPARK OR FLAME. STORE IN
SUITABLE AREA FOR HAZARDOUS MATERIALS STORAGE.
Other Precautions:DO NOT USE NEAR HEAT, FLAME OR SPARKS. AVOID
EXCESSIVE BREATHING OF VAPOR. DO NOT SPRAY IN DIRECTION OF BODY.
USE ONLY IN ACCORDANCE WITH DIRECTIONS.

Respiratory Protection:IF TLV IS EXCEEDED WEAR NIOSH-APPROVED
SELF-CONTAINED BREATHING DEVICE OR RESPIRATOR.
Ventilation:MUSE BE ADEQUATE TO MAINTAIN VAPORS AT LESS THAN 400PPM
PARTICULARLY AT FLOOR LEVEL AS VAPORS ARE HEAVIER THAN AIR.
Protective Gloves:NORMAL USE-NONE. PROLONGED EXPOSURE-NITRILE,
IMPERVIOUS.
Eye Protection:SAFETY GLASSES OR GOGGLES RECOMMENDED.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:G2
Boiling Pt:=34.4C, 94.F
B.P. Text:FOR DIETHYL ETHER
Vapor Pres:150 PSIG IN CAN
Vapor Density:APPROX 2.5
Spec Gravity:0.70
pH:NP
Viscosity:NP
Evaporation Rate & Reference:APPROX 6, BUACE=1
Solubility in Water:APROX 6% @70F,MODERT
Appearance and Odor:PALE YELLOW TO CLEAR LIQUID, STRONG ETHEREAL ODOR
Percent Volatiles by Volume:86.0
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
UNSTABLE EXPLOSIVE PEROXIDES MAY BE FORMED AND CONCENTRATE BY
EVAPORATION TO HAZARDOUS LEVELS. THIS PROCESS IS FAVORED BY
PROLONGED STORAGE WITH EXPOSURE TO AIR AND LIGHT.
Stability Condition to Avoid:HEAT SPARKS, FLAMES, STRONG OXIDIZERS.
Hazardous Decomposition Products:CARBON MONOXIDE MAY FORM ON
COMBUSTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE
AND FEDERAL REGULATIONS. DONT PUNCTURE OR INCINERATE. AVOID ANY
CONTAMINATION OF GROUNDWATER.

Transport Information:DOT SHIPPING CLASSIFICATION: COMPRESSED GAS,
FLAMMABLE (ETHER, CARBON DIOXIDE); HAZARD CLASS 2.1; UN1954; LABEL
REQUIRED- FLAMMABLE GAS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.